LG BP06LU10 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Optické jednotky LG BP06LU10. LG BP06LU10 User manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 4
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
• Please pay attention to handling Electrostatic
Sensitive Devices, you may use anti-static
products such as wrist straps, heel straps, mats
to protect your body from electrostatic.
• Make sure you have a personal computer with
one or two open USB ports before connecting
the drive to your computer.
• Power for all other devices should be turn off
before attaching the cables.
Connect the drive to the computer as shown in
figure.
1 Connect the USB 2.0 (Y type) cable to
the drive.
2 Connect the other end of the USB 2.0
cable to your computer.
3 The drive may get its power from the PC
USB power. All systems may not meet
USB power requirements and full
performance may not be achieved.
In this case, connect to the USB power
cable.
When the computer is ready, confirm that the
drive is detected. And then, insert the supplied
software CD into the drive and install the
software.
Please do not connect the USB cables by any means other than specified above.
Using the wrong type of cable with this drive can cause it to malfunction.
• The appliance is not intended for use by young children or infirm persons without supervision.
Young Children should be supervised to ensure that they do not play with appliance.
• If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord
extension set on electrical portable outlet device must be positioned so that it is not subject to splashing
or ingress of moisture.
Installation
NOTES
Connecting to computer
Hardware Installation
NOTES
USB Power cable
1
2
3
Zobrazit stránku 0
1 2 3 4

Shrnutí obsahu

Strany 1 - Installation

• Please pay attention to handling ElectrostaticSensitive Devices, you may use anti-static products such as wrist straps, heel straps, matsto protect

Strany 2

1. Disc Tray2. Drive activity indicatorThe LED is used to indicate the operation ofdrive.3. Eject Button4. Emergency Eject Hole1. USB Connector (mini)

Strany 3 - Quick Set-up Guide

Features• Universal Serial Bus (USB) 2.0 interface for high-speed data transfer.• Buffer Under Run error protection technology• Emergency eject sup

Strany 4 - Safety Instructions

Safety InstructionsCLASS 1 LASER PRODUCTLASER KLASSE 1 PRODUKTLUOKAN 1 LASER LAITEKLASS 1 LASER APPARATCLASE 1 PRODUCTO LÁSERCLASSE 1 PRODOTTO LASERCA

Komentáře k této Příručce

Žádné komentáře