SELECT A GOOD LOCATION
1. Place your refrigerator where it is easy to use.
2. Avoid placing the refrigerator near heat sources,
direct sunlight, or moisture.
3. Air must circulate properly around your
refrigerator to ensure efficient operation.
If your refrigerator is placed in a recessed area
in the wall, allow at least a 10 inch (25 cm) or
greater clearance above the refrigerator and 2
inches (5 cm) or more from the wall.
The refrigerator should be elevated 1 inch
(2.5 cm) from the floor, especially if it is
carpeted.
4. To avoid vibrations, the refrigerator must be
level.
If necessary, adjust the leveling screw(s) to
compensate for unevenness of the floor.
To make closing the door easily, the front
should be slightly higher than the rear.
The leveling screw(s) can be turned easily by
tipping the cabinet slightly.
Turn the leveling screw(s) clockwise to raise the
refrigerator, counterclockwise to lower it.
NEXT
1. Wipe off all dust accumulated during shipping
and clean your refrigerator thoroughly.
2. Install accessories such as ice tray, shelf, etc.,
in their proper places.They are packed together
to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
4. Prior to use, let the refrigerator run for 2-3
hours.
Check the flow of cold air on the evaporator to
ensure proper cooling has taken place.
Your refrigerator is now ready for use.
INSTALLATION
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE, AND INCORPORATES
THE LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION, AND
MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
2
3828JD8497P(O/M)‡»` 2002.12.5 3:15 PM ˘`2
Komentáře k této Příručce