LG 3803 Uživatelský manuál stáhnout pdf (Strana 22)

<<Alarm display on the top screen>>

• The following alarm message is displayed on the top screen. Message is displayed

in red.

[FAN] Indicates cooling fan trouble. If this alarm is displayed, turn the

instrument power off, then contact your local Leader agent.

[TS IN] Monitors each input signal when SPI/ASI is selected as TS input. The

SPI input in BER measurement mode is also monitored.

The alarm is displayed in the following status:

(1) No signal is input.

(2) When the signal other than transport stream (MPEG-2 TS) is input.

(3) When five packets or more packets except 0x47 are continuously

received at the header byte position.

[F STD] Monitors the reference signal. The alarm is displayed in the following

status:

(1) No signal is applied.

(2) Input signal frequency exceeds the PLL lock range.

(3) Input signal level is lower than the acceptable level range.

[OOB] In case of the LG 3803-01 is incorrectly connected.

4-3

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 56 57

Žádné komentáře

LG 3803 Uživatelský manuál Strana 22